Removing Calcium build Up from non-calcite exterior stone

 

Removing Calcium build Up from non-calcite exterior stone

By Frederick M Hueston, StoneForensics.com

Removing white calcium buildup from exterior stone can be a difficult task, but it is doable with the right tools and techniques. Here are some steps to take in order to remove white calcium from exterior stone:

1. Begin by combining one cup of sulfamic acid with one gallon of water. This will produce a mild acid solution that will aid in the breakdown of the calcium buildup.

2. Using a spray bottle or a brush, apply the solution to the affected area of the stone. Make sure to thoroughly saturate the area.

3. Allow at least 15 minutes for the solution to sit on the stone. This will allow the acid to penetrate the calcium buildup and begin to break it down.

4. Scrub the affected area with a stiff-bristled brush. To remove as much calcium buildup as possible, apply firm pressure and scrub in a circular motion.

5. Thoroughly rinse the area with water to remove any remaining solution and debris. Once all the calcium is removed neutralize with a neutral cleaner.

6. Repeat steps 2–5 as needed to remove the calcium buildup.

It's important to note that the steps above are only guidelines; depending on the type of stone, the severity of the stain, and the type of calcium deposit, some stones may require more aggressive acids like hydrochloric.

A mild acid solution, a stiff-bristled brush, and some elbow grease are required to remove white calcium buildup from exterior stone. You can restore the beauty of your exterior stone and protect it from future damage with patience and persistence.

Caution: Do not use this method on calcium based stone such as limestone or marble. There are removers that are non acidic that are available from your stone equipment suppliers.

The Importance of Installing Expansion Joints In a Stone/Tile Shower: What You Need to Know

 

The Importance of Installing Expansion Joints In a Stone/Tile Shower: What You Need to Know

 

By Frederick M. Hueston, StoneForensics.com

 

Have you ever taken a look at the corners of a stone or tile shower and seen that they are all cracked, and in some cases, the grout is completely missing? What about the part of the wall that is flush with the floor? Why does this area have such a propensity for cracking and falling out? The cause is that there are not enough expansion joints or that there are hard joints where there should be soft ones. An important step that needs to be taken before any tiling can be done in a tile or stone shower is the installation of expansion joints in the walls and floor of the shower. The tile must be able to expand and contract in response to changes in temperature, so the installation of expansion joints is required. Tiles are susceptible to cracking and shifting when there are no expansion joints present, which can result in expensive repairs and possible water damage.

The use of expansion joints in a stone/tile shower makes it possible for the tile to expand and contract in response to variations in temperature. When it comes to durability and lifespan, expansion joints are absolutely necessary. If they are not installed correctly, they have the potential to induce cracks in the tile, which will ultimately lead to the tile's early failure. When installing a tiled shower, the joints are placed at the points where the tile meets another material, such as at the intersection of the wall and floor to walls. The joint is filled with a soft caulk such as silicone or urethane, and the amount of caulk used in the joint expands and shrinks depending on the temperature of the region around it. This caulking should be water resistant, mold resistant, and bacterium resistant as well.

Installing expansion joints in a stone/tile shower is a straightforward process inspect the shower for cracks and leaks in the tile or other damage to the walls and floor. You will also want to make sure that the wall and floor are level. remove the old, damaged tile and clean the walls and floor thoroughly.

purchase and install the right type of caulking. There are many types of caulk that can be used and some of them are appropriate for tile and other may stain certain stone.  The following is a breakdown of caulks available:

 

100% Pure Silicone Caulk

The most common type of sealant is silicone caulk, which can also be referred to as rubberized caulking. This caulking is ideal for repairing minor leaks and mold in your shower. It is very easy to apply, it can address all problem areas without any issues, and the rubbery feel stays with it forever, which makes it great for handling the movements in the joints where other options can fracture. Because of these qualities, it is a highly popular choice.

 

The fact that it can be controlled with relative ease, on the other hand, is the key factor that contributes to its popularity. Silicone caulk may be applied directly to your shower, and because it enables a more accurate application, you won't need to use as much of it as you would with other caulks. This cuts down on waste.

 

Because of its longevity and resilience to water, it is the superior material to use in a showers, facets, and other similar areas. It is also more resistant to extremes of temperature, both hot and cold.

Silicon caulk is one of the alternatives that often carries a higher price tag than the others. However, if you take into account how long its effects will stay, you will see that purchasing it is money well spent.

The material is incapable of holding paint, but the problem can be remedied by painting over it with a thin coating of siliconized acrylic latex or by using a primer that is based on oil.

Inorganic Latex Acrylic

This is a low-cost, all-purpose caulk that is simple to work with and can be put to use in a variety of different situations. Additionally, it is simple to paint over. Latex is an excellent material to employ in places with a high porosity and is, in general, the more preferred choice because to the inexpensive cost. This material is a great alternative to silicone caulk because it is not difficult to clean (latex is water soluble), and it is readily available. In addition to that, it dries more quicker and, of all the things on this list, it is possibly the most resistant to mold.

On the other hand, its resistance to water is not nearly on par with that of a 100% silicone. Because of this specific reason, it is possible that it is not the greatest choice for the shower.

Since it is not very expensive, you may always continue applying it to cure small concerns, but problems like cracking and flaking will keep recurring often even after repeated applications.

Caulk made of latex or acrylic, combined with silicone

This hybrid variety of caulk is variously referred to as "painter's caulk" and "tub and tile" caulk. It is comparable to acrylic latex, but offers greater flexibility as an alternative, despite the fact that it is not as flexible as a material composed entirely of silicone. Because it contains silicone, this alternative to traditional latex caulk is both more durable and more resistant to moisture than the latter. It can be the excellent substitute for acrylic latex, and it makes painting over it very easy to do. It is perfect for spots that require only a minimal amount of waterproofing.

Even though the packaging indicates that it is resistant to water, it is recommended that you only apply it on the dry areas that are covered in paint so that the exterior can continue to be protected. It is not a caulking alternative that is particularly successful, which is why it is not recommend using it.

PVA (Polyvinyl Acetate) (Polyvinyl Acetate)

This caulking substance is manufactured from polyvinyl and has all of the features of polyvinyl, such as resistance to mold, durability, and heat resistance. It is very similar to the acrylic latex product, which is also made from polyvinyl. PVA is another alternative that can be painted over.

It does not have very good resistance to water and it deteriorates over time.

Expansion joints, when they are appropriately installed, not only prevent future failures but also improve the overall appearance of the installation, which in turn raises its aesthetic value and ensures that it will last for a longer period of time.

Walk Off and Entrance Mats for your Stone Floors

 

Walk Off and Entrance Mats for your Stone Floors

By Frederick M. Hueston, stoneforensics.com

 

Marble and other stone flooring have long been prized as a symbol of elegance and wealth. However, the cold, hard truth is that if not handled carefully, they can be just that—cold and hard, not to mention expensive to replace. Walk off or entrance mats are necessary to protect your marble/stone floors from stains and scratches, prevent rugs from slipping, and add protection and cushioning.

 

To prevent slipping on marble/stone floors, walk off mats backing needs significant gripping force. Be sure to look for backing made of natural rubber rather than synthetic adhesives and glues, which can stick to and stain floors, to protect your priceless marble/stone floors and keep mats firmly in place. Natural rubber naturally and securely attaches to carpets and floors, whether used alone or in combination with felt. Heat-pressed felt, which delivers a blend of grip and cushion when paired with natural rubber, is also naturally long-lasting.

Keeping your Walk Off Mats Clean

Every floor mat needs to be cleaned frequently. However, this is particularly crucial for entrance floor mats. Entrance floormats are frequently subjected to highly adverse weather and environmental circumstances. This occurs as a result of the installation of entrance mats across the doorway. Others are positioned right outside the door, while others are placed right within the house. The doorway is covered with additional entrance mats that stretch both inside and outside the house or building. As a result, more dirt and moisture are present on the mat because it is exposed to exterior weather and environmental factors. The heavy use is another justification for routine entrance mat cleaning. Anyone entering your house or office building must tread on and scrape on the welcome mat. This implies that a lot of dirt, muck, wetness, and debris are collected by entrance mats. To make your entrance floor mats more practical and to maintain your building clean, you should give them a thorough cleaning.

Also don’t forget the underside. Many walk off mats can accumulate moisture under them and this can cause staining on the stone floor. You should remove the mats regularly and clean and dry the underside.

There are many types of mats available so be sure to check with your local janitorial supplier for recommendations. Even the best mats if not properly cleaned can damage stone floor so make sure to regularly clean these mats and if they are worn replace them.

 

5 steps to complete a successful ceramic tile installation for the DIY

 

5 steps to complete a successful ceramic tile installation for the DIY

Frederick M. Hueston, Stoneforensics.com

 

If laying ceramic tiles is totally new to you, “5 Steps to complete a successful ceramic tile installation” is a set of basic but important tips that you will help you avoid making costly mistakes on your next bathroom or ceramic tile installation.

” Plan which Tile
” Shop around if you want to save
” Prepare the surface for a long lasting job
” Lay the tiles
” Finishing touches

Plan which Tile

This step is often underestimated and sometimes even forgotten (can you believe it?). Planning your ceramic tile installation from A to Z is probably one of the most important steps for a smooth, easy going and problem free bathroom tile installation.

Some things to take in account are;

” Suitability of the tile
” Pattern /colour of the tile
” Size of the tile
” Size of the area to be tiled. (This is important data that will be vital to know how much tile, grout, etc, you have to buy)
” Adhesive, mortar or grout to suit your needs

Not all ceramic tile installations are the same, different tiling installations may require different mortar or grout. DO NOT feel shy about asking the suppliers for advice or help in calculating how much you need. They will gladly help you, as they are likely to make a sale.

Shop around if you want to save

This isn’t as difficult as the first step, however when the budget is tight it can be tricky to find the right tile for the ceramic tile installation you want. You are going to have to make some compromises and so don’t get carried away by the beauty of some of the ceramic tiles. Prices can vary a lot between different tiles, so some end up rather expensive for only a few square feet.

Always shop around, it has never been easier. Just sit in front of the computer and use the Internet. Use local directories to find the suppliers close to you and pay them a visit.

Before making your final decision always check the chosen tile under different lights as the results can be surprisingly different.

Prepare the surface for a long lasting job before laying the ceramic tiles
The surface to be tiled (floor, wall or any other) will often need to be prepared, this can include work like filling, levelling, smoothing, priming and sometimes water proofing.

The right preparation will be directly affect the lifespan of the ceramic tile installation. Unless you want to be tiling again soon, you want to get this right from the start.

This is probably the most important point to ensure a long lasting tiling job. Don’t rush it.

Laying the ceramic tiles safely

The technique of laying ceramic tiles is not especially difficult. It only takes a little bit of practice before anyone can easily master it. Clearing the room to be tiled before starting will help you to do the job safer and easier. Don’t forget to wear your safety goggles when cutting or chipping tiles.

Laying ceramic tiles can also be a bit messy, if you don’t want dust all over the house we suggest sealing the room you want to tile whenever possible. A large piece of plastic tacked to the door frame will do the job quite well.

Try not to allow any adhesive to get on your skin and never forget to read the manufacturers directions before even opening the tin. If some ends up on you, just clean it with water as soon as possible. Even though tile adhesives aren’t usually abrasive, if you leave it for some time it may cause an allergic reaction.

Use a spirit level to help you with the depth & level of the tiles and spacers to maintain an even distance between them.

The finishing touches

Once the tile adhesive or mortar has cured (dried) and the tiles are firm and even, you can start with the finishing touches.

You’ll have to fill the spaces between tiles with grout making sure you don’t leave any gaps as these cause damp problems, in a shower for example.

The technique is very simple, use a rubber faced trowel to spread the grout and a cotton cloth to clean the excess grout from the tiles afterwards.

There are many different types of grouts; you’ll have to choose the right one depending on the surface and chosen tile.

Now that you have your ceramic tiles laid down, you only need to take care of them, usually manufacturers provide information on taking care of their tiles and only minimal effort is required. Most household cleaning products will do the job well, if some particular stain is stubborn, there are many commercial stain removers, just make sure you use the right product for the right tile.

You are now closer to discovering how satisfying it can be handling a tile installation yourself; just follow these 5 steps to get the best result.

 

Advantages of Kitchen Granite Countertops

 

Advantages of Kitchen Granite Countertops

By Frederick M. Hueston, StoneForensics.com

 

Kitchen granite countertops are created by nature and fashioned by man are a beautiful, durable and cost-effective choice for kitchens and baths. The term granite comes from the Latin root word granum, which means “grain.”

Granite is often imported from Europe, Africa, Brazil, and other regions of the world rich in natural stone. Granite is an attractive natural stone that will add color and warmth to your kitchen. Granite is an extremely hard material that will not blister, scratch or crack.
The hardness of granite is rivaled only be the hardness of diamonds. In fact, diamonds are used to cut and polish granite.

Over the last 10 years kitchen granite countertops have become popular with homeowners, after first being popular with designers for decades. Granite is available in hundreds of colors, from various shades of white to browns, reds, greens, blues, and black. The most popular tones are brown and beige.

As well as being hard kitchen granite countertops can take hot items, like pots and pans, and is very stain resistant to hot grease and oil if it is sealed with a good quality impregnator. It can easily be cleaned and cut for a basin. Granite has a cool polished surface that makes it an excellent surface for rolling out pastry dough. The polished finish of granite will not wear off easily.

Kitchen granite countertops are unique because no two pieces of granite are exactly the same, therefore granite provides an interesting design element and adds certain richness and texture to your kitchen not found in other surfaces. Kitchen granite countertops can create a brilliance and elegance that is only found in nature. Granite adds a personality and character to kitchen countertops that is unsurpassed. Kitchen granite countertops have a natural beauty that can complement any tone of wood or style of cabinets.

It does not matter if you are planning a new home or remodeling an existing kitchen, with granite kitchen countertops you can be sure that you will add to value of your home.

Kitchen remodelers and home builders have experienced a boom in the demand for kitchen granite countertops. Although it can be more expensive to put in granite countertops, they remain the odds-on favorite choice for more upscale homes, since they keep their value better than most home improvements

The investment you make in kitchen granite countertops should pay you back at least three times what you invested. If you are selling your home, you will find that home buyers wanting kitchen granite countertops will be willing to pay more for your home than if you have ceramic tile or plastic laminate.

Planning out your kitchen granite countertop first involves selecting the right granite color. You should concentrate on the most popular colors. Even though granite tones are usually neutral, you may find that a certain color goes well for your kitchen design.

If you are replacing the old countertop material in your kitchen with granite, carefully diagram all the measurements for the granite installer. If installing new cabinets is part of your kitchen remodel, ask the granite fabricator what they recommend for cabinetry.

Since you are using such a superior product as granite, you should think about the right type of sink to go with your new kitchen granite countertop. You should definitely consider going with an undermount stainless steel sink, as opposed to an overmount sink that would be difficult to clean around.

In addition to getting the right kind of sink installed, it is also important to select the just the right faucet to go with the sink. A stainless-steel faucet would go well with the looks of a rich kitchen granite countertop.

The next important area is upgrading your cabinet hardware. The handles and knobs should also be of high quality to provide good accent to the overall look of the kitchen. Even if you are not replacing the cabinetry having high quality hardware with make those cabinets and the whole kitchen stand out.

So, in planning your kitchen remodeling, just remember that kitchen granite countertops will make a provide a world-class addition and increase the re-sale value of your home.

 

What’s the Dark Ring Around my Granite/Quartzite Sink

 

What’s the Dark Ring Around my Granite/Quartzite Sink

By Frederick M. Hueston

You've probably heard of ring around the collar, and in the stone business, we sometimes refer to it as "ring around the sink" or "ring around the profile." Recently, I have been inundated with inquiries on the reason why particular granites and quartzites begin to form a dark ring around the perimeter of the sink and sometimes around the top edge of the profile. This darkening can occasionally appear shortly after the installation, while other times it can take several months before it becomes noticeable. What factors have contributed to this darkening, and more importantly, how can it be remedied?

 

The formation of a dark ring around the sink or profile of granite and quartzite is a common occurrence, and several factors can contribute to its development. One primary factor is the accumulation of soap residue, body oils, and other substances that are not entirely removed during regular cleaning. Over time, these substances can create a dark and unsightly ring that can be difficult to remove.

Another factor is the porosity of the stone. Certain granites and quartzites are more porous than others, which makes them more susceptible to staining and discoloration. Additionally, the type of sealer used during installation can play a role in the formation of a dark ring. If a low-quality sealer is used, it may not provide adequate protection against staining and discoloration.

Not sealing the underside or sides of the stone can also cause moisture to soak in causing these rings.

Also, the use of certain caulking types such as silicone and acrylics that are used to seal the sink to the stone can bleed into the stone causing it to darken.

 

Fortunately, there are several remedies for these issues. The first step is to thoroughly clean the affected area using a mild soap and warm water. For stubborn stains, a poultice can be used to pull the stain out.

To check for moisture use a moisture meter to see if the darkening is moisture. If it is moisture, it can sometime be dried out by carefully using a hair dryer or heat gun.

If the staining is caused by the caulking used than the sink may have to be removed, the caulking scraped away, a poultice applied and then reinstalled with a non-staining caulk.

 

 

Once the darkening has been removed, it is crucial to apply a high-quality sealer to protect the stone from further staining and discoloration. The seal should be applied to the sides as well as the overhang on the sink.

While ring around the sink may be an unsightly and frustrating issue, it is a common one that can be remedied with proper cleaning and the application of a high-quality sealer.  

 

Some Kitchen Design Ideas

 

Some Kitchen Design Ideas

By Frederick M. Hueston, www.stoneforensics.com

 

In deciding on how to design your kitchen, you must take into consideration such things as: will your kitchen have an island?  Will it be of a modern or traditional design?  What kinds of appliances will you need for your new kitchen design?   What kind of lighting design?

Kitchens have evolved a lot over the years.  Once found only in the rear of the house, today's kitchen design takes the kitchen out the background.  The challenge for kitchen design is in creating a more open-faced kitchen, that is part of a dining area, a family room or a great room.

In deciding on how to design your kitchen, you must take into consideration such things as: will your kitchen have an island?  Will it be of a modern or traditional design?  What kinds of appliances will you need for your new kitchen design?   What kind of lighting design?

 

1. Kitchen as 'Great Room' 

Whether you are redesigning an existing kitchen or planning a new kitchen in a new home there are some design considerations to keep in mind, such as including in an island or peninsula as part of the kitchen design.  These can be used to connect the kitchen to a nearby dining area or family room thereby creating a 'great room'.   A kitchen island or peninsula will allow the cook to keep in visual and conversational contact with family members or guests in the adjoining family or dining room.

2. Create a Kitchen Canopy

To give the kitchen some visible borders without blocking views create a kitchen canopy.  Also a high ceiling in the kitchen can create the perception of spaciousness.

3. Using Kitchen Cabinet Color to Set Tone of Kitchen Design

Kitchen cabinets will help set the tone for the whole room.  The choice of wood will influence the overall look of your cabinets.  To create a light look, use a light wood such as ash, beech, birch, oak, maple, or chestnut.  For medium range, select cherry.  To darker kitchens, choose wood that has some color to it.

4.  Plan Out Use of Cabinets and Drawers in The New Kitchen Design

Plan out in the kitchen design blueprint just how your cabinets and drawers will be used and how much space and storage you will need before you start your new kitchen design.  The first thing to examine is the counter surface area.  Look at where you put everything in your existing kitchen and where in your new kitchen design will these things will go in the new space.  Will there be more than one person cooking at a time.  If so, will there be enough room for two cooks in the kitchen to work together?

 

 

5. Use The Galley-Type Kitchen Design

As for counter arrangements, many kitchen designers agree the galley-type design to be the best in terms of efficiency with it's single aisle and counters to either side, making it easy to turn around to go from sink to cooking range.

6.   Under-Cabinet Kitchen Lighting

Kitchen lighting can be an overlooked area of kitchen design.  Even if the kitchen has generally good lighting, the counter areas can be somewhat dark.  For these areas under-cabinet lighting can help provide more light to work in.  By using simple spots or fluorescent lights a smaller kitchen can be made to look larger.

7.   Looking at Countertops

Granite, marble, and limestone are all popular natural materials for use in countertops are available in many colors.  Ceramic tile kitchen countertops are versatile, practical, and also available in many colors, as well as many shapes, patterns, and finishes.  Solid surface countertops provide seamless acrylic faces.  Solid surfaces also come in almost limitless colors, patterns, and styles, and are stain and heat resistant.  Laminate countertops are more affordable but not built to last.  Concrete countertops are known for versatility, as well as strength.  Wood countertops are long lasting and easy to clean and repair but the wood will not withstand exposure to water and household chemicals.  Stainless steel countertops lack the elegance of granite or tile.   These countertops do not absorb stains, but tends to scratch easily.

 

 

Soapstone Countertops Decidedly Magnificent

 

Soapstone Countertops Decidedly Magnificent

By Frederick M. Hueston, StoneForensics.com

 

Soapstone countertops may be just the thing you’re looking for in a decorators dream of a kitchen! Not only do these type countertops look wonderful, they’re also one of the most durable and maintenance-free countertops you can choose. Read on to find out more about soapstone countertops and what makes them so wonderfully appealing.

The mineral used to make soapstone countertops, steatite, comes from metamorphic rock. This non-porous material offers an ideal medium for applications such as kitchen countertops because it does not absorb liquids. Unlike other materials often used for kitchen countertops, including granite, soapstone countertops do not stain because of this unusual characteristic.

Another exceptional quality about soapstone countertops lies in its unique thermal properties. Nearly heatproof, placing a hot pot or pan directly from the stovetop or oven on it causes no damage whatsoever. Because of its excellent ability to withstand heat, this mineral is used not only in soapstone countertops, but also in a number of other applications including laboratory counters, oven interiors, grills, and many more.

One of the most remarkable and attractive properties of soapstone countertops stems from its upkeep. Maintaining soapstone countertops means nothing more than regularly applying mineral oil to it with a rag. By keeping the same rag sealed in a zip-locked plastic bag and reusing it, one maintains the beauty and luster of soapstone countertops indefinitely. The oiling of soapstone countertops also creates the added benefit of it darkening over time to a dark gray and eventually to a rich, deep black color. Sometimes soapstone countertops develop deep green markings that come from natural-occurring shadings of the stone.

Scratches or marring inevitably occurs in soapstone countertops that receive heavy use. To remedy this, first sand with 120-grit sandpaper, then go over the mark with 220-grit sandpaper and water. Rub mineral oil into the area, wait a few hours and apply more mineral oil. Continue to apply mineral oil over the course of several days until the soapstone that has been repaired matches its surrounding areas.

Now that you know more about soapstone countertops, why not do some research yourself? You may find this unusually appropriate material just the thing for which you’ve been looking in a kitchen countertop. You’ll never know, though, till you check it out. The wave of the future in kitchen design may very well be soapstone countertops. Don’t miss out!

 

How to complete a successful ceramic tile installation for the DIY

How to complete a successful ceramic tile installation

Frederick M. Hueston, Stone Forensics  www.stoneforensics.com

 

If laying ceramic tiles is totally new to you, “how to complete a successful ceramic tile installation” is a set of basic but important tips that you will help you avoid making costly mistakes on your next bathroom or ceramic tile installation.

” Plan which Tile
” Shop around if you want to save
” Prepare the surface for a long lasting job
” Lay the tiles
” Finishing touches

Plan which Tile

This step is often underestimated and sometimes even forgotten (can you believe it?). Planning your ceramic tile installation from A to Z is probably one of the most important steps for a smooth, easy going and problem free bathroom tile installation.

Some things to take in account are;

” Suitability of the tile
” Pattern /color of the tile
” Size of the tile
” Size of the area to be tiled. (This is important data that will be vital to know how much tile, grout, etc, you have to buy)
” Adhesive, mortar or grout to suit your needs

Not all ceramic tile installations are the same, different tiling installations may require different mortar or grout. DO NOT feel shy about asking the suppliers for advice or help in calculating how much you need. They will gladly help you, as they are likely to make a sale.

Shop around if you want to save

This isn’t as difficult as the first step, however when the budget is tight it can be tricky to find the right tile for the tile installation you want. You are going to have to make some compromises and so don’t get carried away by the beauty of some of the tiles. Prices can vary a lot between different tiles, so some end up rather expensive for only a few square feet .

Always shop around, it has never been easier. Just sit in front of the computer and use the Internet. Use local directories to find the suppliers close to you and pay them a visit.

Before making your final decision always check the chosen tile under different lights as the results can be surprisingly different.

Prepare the surface for a long lasting job before laying the tiles
The surface to be tiled (floor, wall or any other) will often need to be prepared, this can include work like filling, levelling, smoothing, priming and sometimes water proofing.

The right preparation will be directly affect the lifespan of the tile installation. Unless you want to be tiling again soon, you want to get this right from the start.

This is probably the most important point to ensure a long lasting tiling job. Don’t rush it.

Laying the ceramic tiles safely

The technique of laying tiles is not especially difficult. It only takes a little bit of practice before anyone can easily master it. Clearing the room to be tiled before starting will help you to do the job safer and easier. Don’t forget to wear your safety goggles when cutting or chipping tiles.

Laying tiles can also be a bit messy, if you don’t want dust all over the house we suggest sealing the room you want to tile whenever possible. A large piece of plastic tacked to the door frame will do the job quite well.

Try not to allow any adhesive to get on your skin and never forget to read the manufacturer’s directions before even opening the tin. If some ends up on you, just clean it with water as soon as possible. Even though tile adhesives aren’t usually abrasive, if you leave it for some time it may cause an allergic reaction.

Use a level to help you with the depth & level of the tiles and spacers to maintain an even distance between them.

The finishing touches

Once the tile adhesive or mortar has cured (dried) and the tiles are firm and even, you can start with the finishing touches.

You’ll have to fill the spaces between tiles with grout making sure you don’t leave any gaps as these cause damp problems, in a shower for example.

The technique is very simple, use a rubber faced trowel to spread the grout and a cotton cloth to clean the excess grout from the tiles afterwards.

There are many different types of grouts; you’ll have to choose the right one depending on the surface and chosen tile.

Now that you have your tiles laid down, you only need to take care of them, usually manufacturers provide information on taking care of their tiles and only minimal effort is required. Most household cleaning products will do the job well, if some particular stain is stubborn, there are many commercial stain removers, just make sure you use the right product for the right tile.

You are now closer to discovering how satisfying it can be handling a tile installation yourself; just follow these 5 steps to get the best result.

There are also numerous video on youtube that can show you how to properly install tile. If your not comfortable than hire a professional tile installer