Are my Weep Holes Clogged? Why my shower floor is darkening

 

Are my Weep Holes Clogged? Why my shower floor is darkening

By Frederick M. Hueston

Shower drains are an essential part of any bathroom, but over time, they can become clogged with debris, soap scum, and hair. Weep holes are an integral part of shower drains as they help to prevent water from pooling in the shower pan, but they can also become clogged, which can lead to problems such as mold growth, unpleasant odors, and even water damage. The most common sign of clogged weep holes in stone shower is a large discoloration around the drain.

Cleaning the weep holes in your shower drain is a relatively easy task that can be done in a few simple steps. Here's what you need to know:

Gather the necessary tools and materials.

Before you start cleaning the weep holes in your shower drain, make sure you have the following tools and materials:

Rubber gloves

Screwdriver

Wire brush or toothbrush

Vinegar or baking soda

Warm water

Remove the shower drain cover

To access the weep holes, you'll need to remove the shower drain cover. Use a screwdriver to loosen the screws holding the cover in place. If the cover is stuck, use a flathead screwdriver to gently pry it up.

Clean the weep holes

Once you've removed the shower drain cover, you should be able to see the weep holes. Use a wire brush or toothbrush to scrub away any debris that may have accumulated in the holes. If the weep holes are severely clogged, you may need to use a small tool such as a toothpick or tweezers to remove any stubborn debris. You can also use a awl with a right angle bend at the tip.

Use vinegar or baking soda to clean

If you notice that the weep holes are still clogged, you can use vinegar or baking soda to help break up any remaining debris. Pour a cup of vinegar or a quarter cup of baking soda down the drain and let it sit for 10-15 minutes. Then, pour warm water down the drain to flush out the debris.

Reinstall the shower drain cover

Once you've cleaned the weep holes and flushed out the drain, you can reinstall the shower drain cover. Use the screwdriver to tighten the screws and ensure that the cover is securely in place.

Cleaning the weep holes in your shower drain is an essential part of maintaining your bathroom's plumbing system. By following these simple steps, you can keep your shower drain free of debris and prevent water damage, mold growth, and unpleasant odors. Remember to clean your shower drain weep holes at least once every six months to ensure that they are functioning correctly.